Table of Contents[Hide][Show]
Top 6 Hardware Skateboard
Most times, when you skate or surf on your boards, you always do that with a fearful mind not necessarily because you will fall and sustain a minor injury but because you are afraid your lovely skateboard might not get repaired to what it used to be if the skateboard breaks down. Sometimes, you might have been in a situation where the skateboard ran out of control and lost the bolts and screws that held it.
When at this very point that you feel all hopes are gone and all faith is lost because your skateboard broke down during a minor accident, never forget that the parts or even better parts are available online to ensure that it is repaired as soon as possible. Therefore, enjoy your choice as I take you around to see the best hardware skateboards.
Before we proceed, kindly note that this article serves as a guide in the journey of taking you around to see the various hardware skateboards after which you would be left to make your choice. Therefore, in this article, a rundown of all the identified best hardware skateboards will be precisely given here with their features, as well as their pros and cons.
Best Hardware Skateboard: Our Top Pick
List of The Best Hardware Skateboard
Enjoi Little Buddies Bolts Hardware
Little Buddies Bolts Hardware is an amazing product that no one should avoid having. This lovely product is manufactured and branded by Enjoi to make your skateboard undergo the best services it has ever gone through. This little Buddies bolts hardware package comprises different bolts of the same size but with different colors. In the Buddies’ package, there are three black bolts and three black screws of the same size respectively.
Also, there is an additional bolt and screw that is multicolored. In each of these colors are: blue, red, green, yellow, orange. These bolts and screws are used to tighten up all worn-out parts and help all skateboards to bounce back new on the streets to start new adventures for the skateboarders.
Features- Little Buddies Bolts Hardware consists of three bolts and standard screws
- The product also has additional bolts and screws of different colors.
- These multicolored bolts and screws are in blue, red, green, yellow, orange.
- The bolts and screws are multi-colored, thereby, giving skateboarders the chance to go for their preference or choice.
- This package can be used to efficiently set up all premium skateboards of different sizes or colors.
- The product only works for skateboarding sport.
- When screwing the bolts, it requires total attention and focus.
Beisy All in-one Skate Tools Hardware
Finally, before you turn your back to choose all these fantastic brands and products on Amazon, you need to see this last superb product from BEISY. This amazing brand produced exceptional hardware tools and these tools are mainly designed for your skateboards. They produced an all-in-one skate that catalog eight pieces of screws and eight pieces of nuts. These quality products can perfectly and efficiently work with skateboarders and longboarders.
Apart from a T-type tool and the eight skateboard hardware in the pack, the package also consists of 3/8, 1/2, and 9/16 Sockets and Phillips Screwdrivers. The high-standard industry produced high-quality bolts made directly from stainless. Their screws are finished products of steel and zinc. A screw is 25 mm in length and the whole package weighs 0.17 Kilograms.
Features- A pack of one T-type skating tool and eight skateboard hardware.
- Socket and Phillips Screwdriver of different lengths such as 3/8, 1/2, 9/16.
- Stainless steel bolts and Stainless Zinc nuts
- The package weighs 0.17 Kilograms and the item dimensions are in the L×W×H of 6.02 x 5.2 x 1.1 inches
- BEISY’s replacement kit is used for all skateboards and longboards of different types.
- The nuts and screws are made from stainless steel, therefore, giving the advantage for durable products.
- Their industry guarantees 100% assurance and if there is counterfeit, the money will be returned.
- And if after you buy their products, you decide to ask questions, they have reliable and friendly customer service and professional skateboarders on board.
- The measurement of their products is only taken with hands.
- Allowing a slight error in measurement might confuse skateboarders.
YS Sport Skateboard Mounting Hardware
This mounting hardware is a product of YS Sport created purposely to help to tighten all parts of the skateboard firmly. The product is packaged with different nuts and screws of different sizes, colors, and choices. In this YS Sport package, there are sixteen nuts and sixteen screws – eight pieces are black and the other eight pieces have a golden color.
These durable nuts and screws were made from carbon-steel material and measured as 1inch in size. The packaged item has its dimensions of length, width, and height in 3 by 2.4 by 0.3 inches consecutively and the whole package has a weight of 0.07 Kilograms. These durable screws are hard and have a hexagon shape. They are mainly used for decking trucks and mounting skateboard.
They are strong, high standard, and made for customers looking for quality products. The product will be shipped or delivered directly to your doorsteps within a twinkle of an eye.
Features- I6 items of nuts and 16 durable screws of two different colors
- These replacement screws have a hexagon shape and are made from carbon steel
- The nuts are black and the screws are hard and measured as 1inch.
- The nuts and screws weigh 0.07 pounds
- The product is two-sided useful: it can be used for mounting skateboards or trucks on the deck.
- The premium replacement kit has a 30-day warranty.
- The screws are very hard.
- The screws can easily strip out if not properly and are firmly mounted on the board.
Fireball Stainless Skateboard Hardware
Much has been said about some amazing hardware products but in case you are yet to pick your choice, here is another product you must own. This steel dragon skateboard hardware is a product of fireball and was branded to give optimum satisfaction to all skateboarders whether beginner, professional or seasoned skateboarder.
The brand cares so much about durable items and longevity in satisfaction, therefore, they engineered stainless skateboard hardware for skateboarders and longboarders. Their skateboard hardware feels so much on quality and superb strength. This steel skateboard is available in different sets depending on your choice.
One of the three sets is Button Allen Hardware. This is mounted on the top of the deck or trucks compared to other sets that do not sit on the top. In the product package, there is always a stainless washer that helps to prevent the deck or trucks from rusting or getting damaged over time. The bolt head, on the deck, helps skaters to position their stands in the right place whenever their legs touch the bolt head. It requires a 1/8 Allen bit.
Flat Allen Hardware is another set that has the same head shape as Flat Phillips. It cannot be felt under feet like Button Allen but it requires 1/8 Allen bit/driver to be stripped. Finally, Flat Phillips is another exceptional hardware head that is inserted into the board to fasten the top of the board firmly. It as well requires 1/8 Allen and sinks very deep without causing a touch on the foot.
Features- Fireball stainless hardware has three sets – Button Allen, Flat Allen, and Flat Phillips
- Their mounting bolts are made of steel thereby, making them strong and durable to use.
- Their nuts are coated in zinc and are produced from steel.
- Allens are super-strong and does not strip out easily
- Phillips is easy to install on the boards.
- The product weighs 0.09 Kilograms with a size of 1.0
- This product provides skateboarders with different sets of hardware for them to choose which one is suitable.
- The nuts and bolts are made from steel, therefore, undoubtedly not prone to rust or any danger.
- The product guarantees 100% satisfaction and its manufacturer promises to refund money if it does not give the utmost satisfaction as expected.
- The product is available in different sizes for all boards/trucks.
- Fireball’s three sets serve better in different ways.
Hotop 24-pieces Skateboard Hardware Set
Before you eventually go for the right choices you have in mind and which you are about to pick, you need to as well check this amazing product by Hotop. Hotop skateboard hardware comprises two sets of top-rated 24 bolts and the most valued 24 nuts. These standard and durable replacement kits are made from reliable materials that can guarantee lifetime skating without any damages on the boards.
Also, this hardware comprises a standard screwdriver head and hex key or Allen key mounting screws. The screw is 1.25 inches in size and length and has a black color. The screws are made directly from steel thereby, resisting any corrosion and stripping easily. The bolts have a strong grip on the holes and do not allow the nuts from loosening easily.
Features- The package includes two sets – 24 bolts and 24 nuts
- It also contains a cross screwdriver and hex key or Allen key wrench
- The screws are 1.25 inches and black.
- The screws are made durable from steel materials.
- The package items are measured in the dimensions of L×W×H as 4.8 x 3.39 x 0.63 inches respectively.
- The product produces numerous bolts and nuts that will serve skateboarders for a very long time.
- The screws are made from quality steel thereby, assuring skateboarders that they possess a durable product.
- The package includes some additional parts: a screwdriver and a hex key wrench.
- The product is far from being expensive
- It involves manual measurement, therefore, improper measurement can go against the function of the product.
- Color differences.
Bones Wheels 1-Inch Skateboard Mounting Hardware
Meanwhile, it does not stop there, on Amazon, there is another stall packaged and branded by Bones Wheels. They as well have a top-notch product that every skateboarder must have. Their premium replacement kit contains eight sets of quality nuts and bolts. The nuts and bolts weigh 0.05 Pounds in different dimensions of L×W×H and the dimensions are calculated in 4.6 by 2.8 by 0.4 inches respectively.
Moreover, apart from the high-grade sets of products, they as well create a comfortable balance of foot through the white heads of the bolts spotted exactly where the foot is placed. These nuts and bolts are mounted on the trucks to pin down the deck for a smooth and enjoyable ride. The whole package of the nuts and bolts weighs 0.05 Kilograms and the bolts are colored in black with whiteheads and the nuts in black also.
Features- Eight sets of black nuts and black bolts with whiteheads
- The mounting hardware is 1inch long
- They are used to mount trucks on the decks.
- The package and items weigh 0.05 Kilograms and 0.05 Pounds respectively.
- The replacement kits are widely produced and suggested for unisex adults although, no restriction on the other sex.
- The whiteheads of the bolts help the foot to be placed in the right position.
- And there is a cool experience for the foot when placed on the white heads of the bolts pin down to the board.
- The product is basically for skateboards
In conclusion, as a skateboarder or accomplice of skateboarder, before you got to this point, you have been taken through the adventure of checking different most valued skateboard and their brands. You must have seen the similarities and the differences as given in this article. This is now the right time for you to make all your choices or some of your choices. I wish you good luck as you decide the best for your skateboard and longboard.