Table of Contents[Hide][Show]
Do Skateboard Wheels Come with Bearings?
A good skateboard needs to have bearings so that the wheels of the board can move with ease. The skateboard, however, comes with two of it, and it’s possible to fill the spaces with spacers. However, they could be added in the middle of the wheel using some technique to help the skateboard run effectively without faults.
Do skateboards come with bearings, or do they need to be fixed? Most skateboards have them while others don’t, but it’s possible to buy and apply them if the need for them arises. Remember that skateboards without bearings in their wheels will not run smoothly, as they provide some benefits to the board and the wheels.
Do Longboard Wheels come with Bearings?
Bearings are very vital tools for any skateboard, but they can still function smoothly without bearing. They are, however, necessary in Longboard. It makes the wheel round and works with a combination of stationary axles and internal hubs of the track.
The Longboard of every type connects with bearings, and they all usually fit into a fixed size. Their connections with the wheels take the pressure off the buyer; they will have to buy it separately.
Are all the Sizes of Skateboard Bearings The Same?
It’s essential to check the size of products before buying them to prevent returning the item that does not fit. The best thing to do when purchasing any item is to, first of all, check the size. No one should buy anything without looking at the requirements and scope. When it comes to the skateboard bearing, the size is usually very vital to check, although some skateboard users wonder if the skateboard bearings all have the same size or not.
The available skateboard has five distinct and vital parts; however, a regular skateboard needs eight crucial bearings, as each of the wheels should have two of these bearings. Moreover, every skateboard bearing has the same size; they are no different.
However, the bearings fit into the skateboard wheels and trucks, so different sizes cannot be. The skateboard comes with an automatic setup, so setting it up by yourself will not be necessary.
Are All Bearings A Perfect Fit For Skateboard & Longboard Wheels?
First and foremost, the bearings on any skateboard are necessary because the skateboard can last longer because of its existence. If anyone is wondering if the skateboard will run smoothly, they can check to ensure that the bearings on the wheels are in place, which will solve any problems that might come up later.
With the bearings, the skateboards will run smoothly. Most of them fit both the skateboard wheels and the Longboard wheels. Remember that they are all of the exact sizes, and they come with fittings so that there will be no need to set it up on your own. A few do not come with bearings; so, it’s essential to check the product before buying.
How To Fix Bearings in Wheels
There are easy ways to fix these bearings on the wheels. First, some tools can be used which will aid the process of installation. They will need tools like:
- Bearings
- Trucks
- Washers
- Skate tools
Here is the process for installation:
- Skateboard trucks need to be prepared: Prepare the two skateboard parts; the hanger and the base plate must also be ready. However, attaching the bearing to the hanger is key and screwing the baseplate to the board’s deck is necessary.
- Put the Bearing and Axel in the washer: Remove the axle nut, then slide from the washer to the axle; place the bearing on the isle and make sure to attach the washer too.
- Attach the bearing with a spacer: Equip the spacer and remove the axle nut. Next, go to the washer and slide through the axle; load it on the axle and then attach the washer.
- Put the skateboard wheels in place: Put one skateboard wheel on top of the bearing and take another one. Then place it on the top side of the wheel and press it using the palm of your hand.
- The washer is the final part: Fixing the wheel with the two bearings, leaving the washer and the axle nut. Then tighten the skate tool to the axle nut. If it is the skate tool that is in use, then the person should release it clockwise.
-
Repeat the process with the other wheel: Three more to go, and following the above steps to put the bearings on the wheel will go a long way. It is going to enhance the speed of the skateboard. It will bring a pleasant experience to the board when riding.
How to remove the bearings from wheels
Knowing how to install the bearings on the wheels is essential, but there are times when removing it from the skateboard wheel will be necessary. At times like these, knowing the bearing removal process will come in handy.
The process of removal is stated below:
- Remove the Wheels: To remove the bearings, removing the wheels is the first work. Use the skate tool or socket wrench to remove the wheels. They should also remove the special bearing shields with many skateboards using a Razor blade or Safety pin. Make sure to check when you use the skateboard spacer.
- The Wheels to the Tip of the Axle Should be on Glide: The bearings from the skateboard wheel should be open using the axle, and from the wheel to the axle, they should glide. Then move the wheel forward because it holds the load with an axle. Remove the bearing puller if the skating tool comes with it.
- Pry the Bearings from the wheel slowly: Gently and slowly press the wheel to the bottom corner. When this is done, the bearing should come out fast; even when it takes time, remain gentle, do not rush the process, or else it could break. Then it will come out good.
-
Take out the second bearing from the skate wheel: Removing the other one from the wheel is next. Now, turn the skateboard wheel and insert the end of the rod axle of the other one. At this point, repeat the prying process and take the bearing from the wheel slowly. When the installation on the skateboard is complete, the user should discard the dirty one.
Maintenance Tips Skateboard Wheels & Bearings
Maintenance is necessary for any tool anyone uses and work anyone does. Maintaining the wheels of the skateboard could be done quickly by the skateboard user using these tools:
- Skate tool
- Safety pin
- A tray for storing your hardware
- Toothbrush
- Bowl
- Lubricant
- Solvent
Maintaining the skateboard wheel and bearing is crucial and can be done in five simple steps:
- First step: Take out the skateboard wheels and the axle nuts through the skate tool and the wrench. Turn the side wheel of the truck off, do not forget to put the washer inside the axle nut and bearing, and store it in a small tray.
- Second step: Remove the bearings from the skateboard wheels; taking the pry out of the wheel is advisable. For the process to go through, use the axle truck.
- Third step: Ensure the cleaner used is a solvent, not a solution (water-based mixture), and they should wear gloves when using the solvent and ensure that it soaks the bearings for some time. After which cleaning it with a toothbrush is next.
- Fourth step: Take out the dirt from the bearing, take it out and then let it dry fast. Add lubricant oil to cause more friction.
- Fifth step: Finally, place the bearing shields and ensure that it is a gradual process not to break or get lost. Now you can try riding your skateboard.
At what point should the Bearings be replaced
Bearings are not permanent; they can break from time to time, and skating for an extended period can make it lose its potency. At this point, the user should change the bearing because it can create problems for the board.
It is advised to change the bearings after every six months to have a better feel of the board.
Conclusion
Not all skateboard wheels come with bearings, so it is necessary to look at the product before purchasing it carefully. It is also essential to check its size before purchasing it to prevent returning it.